Products

DESCRIPTION

Basic Info

Model NO.	TC2
Specification	2.0*1250*C/1.5*1250*C/0.8*1250*C/1.0*1250*C

Product Description

TC2 titanium alloy
TC2 alloy is a near-α-type titanium alloy with medium strength and good plasticity. It contains 4% α-stable element Al and 1.5% β-stable element Mn. This alloy cannot be strengthened by heat treatment and is only used in the annealed state. TC2 alloy has relatively satisfactory process plasticity, weldability and thermal stability. The long-term working temperature can reach 350°C, and the short-term working temperature is 750°C.The semi-finished products of TC2 alloy include plates, strips, bars, pipes, forgings and die forgings. The alloy is suitable for the manufacture of sheet metal stamping and welding parts, etc.

TC2 heat treatment system

1) AnnealingPlates and plate parts: 660-710°C, 15-60min, air cooling or slower cooling; bars, forgings and pipes: 740-790°C, 1-2h, air cooling.2) Stress relief annealing545-585ºC, 0.5-6h, air cooling or furnace cooling.

Effect of forging and heat treatment on TC2 hardness

(1) The annealing temperature has little effect on the hardness of TC2 titanium alloy raw materials. After annealing at 740-790°C, the hardness value of the bar does not change much. After exceeding 800°C, the hardness value increases slightly.(2) After annealing, furnace cooling can significantly soften the TC2 titanium alloy material. After furnace cooling, the furnace temperature has little effect on the hardness. It is recommended to choose 600-650 °C.(3) The cooling method after forging has a great influence on the hardness. The hardness value is the lowest after water cooling, and the hardness value of air cooling, air cooling and slow cooling increases in turn.(4) The cooling method after forging has a significant impact on the microstructure. Acicular martensite can be seen in water-cooled and air-cooled samples. Few flaky ot phases precipitated; air-cooled and slow-cooled samples showed obvious flaky ot phases, and the slower the cooling rate after forging, the coarser and clearer the flaky ot phases precipitated on the residual p matrix. The recrystallization phenomenon of equiaxed Ot phase is more obvious.

TC2 process performance and requirements

1) FormabilityThe alloy has good process plasticity in hot state. Generally, hot stamping is recommended. If the parts are formed in a cold state, intermediate annealing should be used, and the annealing temperature is 650-680°C. When stamping complex parts, it should be formed under heating. The blank can be heated by resistance heating or oxy-acetylene torch, and the heating temperature is generally 550-600 °C.2) Welding performanceTC2 alloy is a nearly α-type titanium alloy, which contains a small amount of β phase in the annealed state, and is suitable for argon arc welding, spot welding and seam welding. Welded joints are not prone to defects such as cracks and shrinkage cavities. The strength and plasticity of fusion welded joints are close to those of the base metal. After welding, it is best to carry out stress relief annealing to eliminate the internal stress of welding.

Suggestions for using TC2
It is recommended to use TC2 titanium alloy on various types of aircraft and engines

Chemical composition

composition	Fe	C	Mn	N	Al	H	Y	O	Other individual	Other combined	More and more
The minimum value	-	-	0.8	-	3.5	-	-	-	-	-	Ti:allowance
The maximum	0.3	0.08	2	0.05	5	0.12	0.005	0.15	0.1	0.4

Pictures show

Company profile
Shanghai heng Joe trade co., LTD. Is an automobile, home appliances and industrial products industries of steel, stainless steel, aluminum, the third party supply chain.
As steel sales, storage, processing, transportation integration company, known as OEM standard materials, materials for customers in the world. We also provide auto metal stamping tool test materials.

Adequate equipment category
Constant Joe trade co., LTD., focusing on automotive materials, high-end home appliance, equipped with large warehouse, product specification is complete, the variety is rich, perennial inventory is enough, many countries around the best-selling, one-stop shopping mode, greatly reduce the purchase cost, more worry.

quality of the product
Shanghai constant Joe trade co., LTD., as baosteel designated dealers, masteel, shougang, VAMA user specified agreement, pay more attention to product quality, the company strictly use good material, do manual work is careful, mature technology, product quality cengcengbaguan more technical staff, its products have strong corrosion resistance, high plasticity, durable not easy deformation, etc., is a very good choice.

Service system perfect
Shanghai heng Joe trade co., LTD., with good production equipment, mature technology, let you no worries worry before purchase. Constant Joe trade co., LTD., equipped with professional logistics team to play, perfect international transport routes, thoughtful service delivery to the factory, your goods can smooth arrival. In addition, if you buy after any aspects of the question, can contact our customer service solutions. Such a complete service system, just to bring you a better purchasing experience.